HP Designjet T730 Setup – Specification about the Printer

  • This printer can be used for the office and also for the start-up business
  • It can function only the printing
  • Has direct wi-fi
  • Holds capacity to print from the e-print and also from the AirPrint
  • Compatible with the mobile printing using the HP smart app
  • Print technology – hp thermal technology
  • Can support printing from Windows, Mac, Apple AirPrint and also using the USB print drivers
  • Contains 1GB memory
  • 4 different color cartridge is provided
  • Certified with the energy star

What is Inside the box?

  • HP DesignJet T730 printer
  • Print head
  • Ink cartridge
  • Printer stand
  • Spindle
  • Power cord
  • Set up poster
  • Startup software
  • Quick reference guide

Unpacking the Printer

  • Unpack the printer from the package
  • Remove all the tape from the printer and place the printer in the safe place
  • After that check that the components with the printer are correctly provided
  • You can also use the manual for the HP Designjet T730 Setup and know the parts of the printer
  • Once this process is done proceed with the HP Designjet T730 Setup

Power up the Printer

  • Connect the power cable to the printer and also connect another end of the power cable to the power outlet on the wall
  • Once you power up the printer, you need to make the general set up to the printer
  • Enter the language, location, time and date on the printer panel
  • After setting the general setting to proceed with the setup steps

Loading the Cartridge

  • You will be getting four cartridges along with the printer
  • Cyan, magenta, yellow and matte black
  • Peel of the black tape on the ink cartridge carefully
  • Hold on the black plastic side on the ink cartridge
  • Open the ink carriage door and insert the ink cartridge carefully on the ink carriage slots
  • Proceed this steps for all the ink cartridges

Insert the paper

  • Load the fresh sheets to the input tray
  • Check the capacity of the input tray of your printer
  • It is always advised to allow the alignment page after you complete the basic settings
  • Printing the alignment page is mandatory to the printer to check that there are any issues  in printing

Connecting the HP DesignJet T730 to the Wireless Network

HP DesignJet T730 Setup

HP DesignJet T730 Setup

There are two types of wireless setting to the printer

  1. WPS method
  2. Wireless wizard method

Before starting the WPS method check that both your router and your printer supports the WPS method

Wireless Wizard Method

  • Enter to the printers panel
  • Navigate to the settings
  • On the settings search for the wireless settings option
  • Allow the printer to search for the networks available
  • After getting the search result, enter your home network
  • Enter the password to configure with your home network

Connect the Printer to the Windows

  • Power up your printer
  • Check that the router is power on
  • Connect the printer to the wireless network using the above-given steps
  • After connecting the network to the printer, proceed to connect the network to the windows
  • Make sure that you connect the printer and the windows to the same wireless connection

HP Designjet T730 Driver Installation using Windows

  • Browse to the hp printer site and enter the printer’s model number on the tab
  • After getting the result, proceed with the download steps
  • Once the driver is downloaded, run the software file and accept for the license
  • After the driver installation on the printer, make the alignment page to check that there is an issue in printing

Tip:  in case if your printer and the Windows are not connected to the same network, you need to enter the IP address of your printer for the driver installation

Steps to Connect the Printer to the Mac

There are two ways to connect your printer with your MAC device

  1. Bonjour connection
  2. TCP/IP
  • Before proceeding with the steps, you need to power up your printer
  • Check that your router is power on
  • Make sure that your printer and the MAC device is connected to the same wireless network
  1. Bonjour Connection

  • Connect the wireless network to the printer and the computer
  • Visit the site and type the model number to get the search for your printer
  • Proceed to download the printer software
  • After the installation, the HP utility automatically sets the connection to the printer
  • Check that the screen has the bonjour option on the screen
  • If you could not find the printer’s name on the screen
  • Click the continue option and navigate to the system preference option
  • Add your printer to the Mac device
  1. TCP/IP Connection

  • Connect your printer and the system to the same wireless network
  • Visit the hp site and install the software which is compatible with your printer
  • After the software installation, check that the hp printer setup assistant set up the connection with the printer
  • Enter your printer name and check that it shows the correct IP printing
  • If you could not find the printer’s name with the IP printing, make sure by entering my printer is not in the list
  • Then proceed with the onscreen instruction

Print from the HP Smart App

  • If you wish to print from your mobile, you can install the HP smart app
  • Using this you can connect your printer to your mobile

For further details on the HP Designjet T730 Setup get in touch with our customer support team @ +1-844-838-8110 or visit 123.hp.com/setup and resolve your issue

Frequently Asked Questions

  1. Whether the HP DesignJet T730 supports HP smart app?

Yes, HP DesignJet T730 supports the HP smart app and you can connect your printer to the mobile by installing this app on your mobile

  1. What are the steps to rectify the troubleshooting issues?

First, check the SSID in which you connect your printer. Then make sure that you enter the valid password. If nothing works then try to power off the printer as well as the router and retry it again

Leave a comment